Machine polishing that removes the swirls, wash marks and holograms the dealer left in it. Correction is what makes paint look wet instead of just clean, and it is the step most shops skip before coating.
Cleaned.
Corrected.
Protected.
A paint correction and coating shop on South Conley, not a car wash that offers wax. Fully insured, NanoLab certified, and every job done in house under one roof.
Kansas City's only
certified NanoLab
installer.
Their claim, on their own site. They also name Gtechniq and Ceramic Pro as brands they were certified on before switching, and they say the shop is fully insured.
- 01NanoLab certified installer
- 02Previously certified on Gtechniq and Ceramic Pro
- 03Fully insured, in house work
- 04Automotive repair and refinishing background
Seven things,
one shop
Straight from their own menu. This is the whole list, not a short version of it.
A hard, hydrophobic layer bonded to the paint so water beads, dirt releases and the finish holds its gloss. It only performs if the paint under it was corrected first.
A physical film over the paint, not a chemical. It takes the stone chips on the bumper and hood instead of your paint taking them, and it is the only thing on this list that stops impact damage.
Real film installed in the shop, cutting heat and glare and holding the interior together under Kansas sun. Ask them what shade fits your car and your taste.
A car straight off the lot still has transport film residue, factory wash marks and no protection at all. This is the cheapest moment in the car's whole life to get it right.
The regular clean, inside and out, for a car that is looked after rather than rescued. It is the entry point most people start with before they go further.
A colour change in film, reversible, and it protects the paint it covers. Their page lists it under what they do, alongside correction and coating.
Wash it wrong
and you add the swirls
Their own words for the process are clean, correct, protect. In that order, and the middle one is the one you can see in a reflection.
- 01
Clean
Wash and decontaminate so the polishing pad is not dragging grit across your paint.
- 02
Correct
Machine polish in stages until the defects are gone and the paint is level again.
- 03
Protect
Coat or film it immediately, because corrected paint with no protection is a clock ticking.
What a coating
does and does not
No invented warranty numbers. This is what a ceramic layer actually does, and what it cannot do.
- Beads water instead of sheeting it
- Releases dirt so washing is quicker
- Holds gloss between washes
- Adds UV resistance at the surface
- Makes bug and tar removal easier
- Stop a stone chip. That is film
- Fix swirls already in the paint
- Replace washing the car
- Undo a poor wash technique
- Work if the paint was not corrected
They are a NanoLab certified installer, and they say they were certified on Gtechniq and Ceramic Pro before that. Their listed services put coating next to the correction and film work, which is how a coating should be sold.
Ask about coatingCars that came
through the door
Their published job list names a Noble M12 GTO, a Mercedes AMG GT-R and a Mosler MT900S. That is the level this shop works at.








Heat is the point
Tint is not a style choice first, it is a heat and glare decision. Ask what shade suits the car and how it reads at night before you pick a number off a chart.
Film takes the hit
Stone chips on a bumper come from the road, not from you. Film is the only product on their list that absorbs that impact instead of the paint absorbing it.
Why the sequence matters
Correct, then coat, then film on top of the high impact panels. Do it backwards and you seal the defects in under the good stuff.
In their customers'
own words
Three reviews published on their own site, with the names and the vehicles they came with.
"Awesome work! Truck never looked so good! Highly recommend!"
"Amazing job Dex! The truck never looked better. Our other vehicles will be out there soon!"
"I had called around to a few other places, but I did not receive a fast response and the pricing was a bit unreasonable at some as well. This was a no hassle experience."
Open right now?
Their published hours, with a live clock. The footer of their own site also claims support 24 hours a day, seven days a week, which the hours table itself contradicts.
| Monday | 9:00 am to 6:30 pm |
|---|---|
| Tuesday | 9:00 am to 6:30 pm |
| Wednesday | 9:00 am to 6:30 pm |
| Thursday | 9:00 am to 6:30 pm |
| Friday | 9:00 am to 6:30 pm |
| Saturday | By appointment |
| Sunday | Closed |
Asked before
every booking
What is paint correction, in plain terms?
Polishing the clear coat back to level so the swirls and wash marks stop catching the light. It is measured work, not a wax, and it is permanent as long as nobody washes it wrongly afterwards.
Do I need correction before a coating?
Yes if the paint has defects you care about. A coating bonds over whatever is there, so coating a swirled car locks the swirls in under a good layer of protection.
Coating or film, which one do I want?
Coating for gloss, water behaviour and easier washing. Film for impact protection on the front end. A lot of cars get both, coating everywhere and film on the high impact panels.
How long does the shop keep the car?
It depends on the job: a standard detail is a day, correction and coating runs longer, film can take longer again. Ask for the day when you call so it is agreed up front.
Are you certified?
They state they are Kansas City's only certified NanoLab installer, and that they were previously certified on Gtechniq and Ceramic Pro. Ask to see the certification when you are in the shop.
Are you insured?
They state the business is fully insured. That matters on correction work, because it is the one service where a mistake cannot be wiped off.
Do you do window tint as well?
Yes, and paint protection film, vinyl wrap, new car prep and standard interior and exterior detailing. Seven services, all listed on this page.
Can you work on a new car straight from the dealer?
That is exactly what the new car preparation service is for. Dealer prep leaves wash marks and zero protection, so the first week is the cheapest time to fix it.
Where are you?
11860 S Conley St in Olathe, just off I-35 and 119th, near the Bass Pro Shop. They say they serve the whole Kansas City metro and accept shipments from anywhere in the country.
What are your hours?
Monday to Friday 9:00 am to 6:30 pm, Saturday by appointment only, closed Sunday. Those are their published hours, shown with a live clock on this page.
Can I just turn up?
You can always stop by, in their words. But correction and coating work needs the car for a stretch, so a call first saves you a wasted trip.
Do you only work on exotics?
No. Their published job list includes a Noble M12 GTO, an AMG GT-R and a Mosler MT900S because those are the jobs they photograph, but the seven services cover ordinary daily drivers too.
Say what the car needs
Three taps and the message is written for you. Send it or call, whichever is faster.
Pick one in each row and your message appears here.
